Cabinets and furniture

Cabinet door sizing and cut list

Size equal overlay or inset doors using explicit edge and centre gaps before planning their joinery.

Separate forms: Cabinet door finished sizing · Rail, stile and panel cut list

Inputs: Opening width (in), Opening height (in), Equal doors across the opening (doors), Gap between doors (in), Overlay per outside edge (in), Inset gap per outside edge (in), Finished door width (in), Finished door height (in), Stile width (in), Rail width (in), Tongue length at each rail end (in), Panel groove depth (in), Total panel clearance in each dimension (in).

Results: Finished width of each door (in), Finished door height (in), Stile length — make two (in), Rail blank length — make two (in), Panel blank width (in), Panel blank height (in).

Drawer box fit and cut list

Check drawer outside width and cut lengths for a box with front and back pieces fitted between full-depth sides.

Inputs: Opening width (in), Slide clearance on each side (in), Drawer outside depth (in), Drawer outside height (in), Actual side thickness (in).

Results: Drawer outside width (in), Drawer outside height (in), Front and back length — make two (in), Side length — make two (in).

Graduated drawer front layout

Plan a complete stack of front heights from an editable ratio; keep drawer-box and slide clearances separate.

Inputs: Opening height (in), Number of drawer fronts (fronts), Gap at every boundary (in), Next-front height divided by previous height (ratio).

Results: Front heights, from top to bottom (in), Total front height excluding gaps (in).

Cabinet carcass and face-frame layout

Calculate rectangular cabinet parts for one declared carcass construction.

Separate forms: Cabinet carcass cut list · Cabinet face-frame layout

Inputs: Outside cabinet width (in), Carcass height (in), Carcass depth, excluding back (in), Actual side/top/bottom thickness (in), Actual overlay-back thickness (in), Outside frame width (in), Outside frame height (in), Outer stile width (in), Top/bottom rail width (in), Mullion width (in), Equal clear bays (bays).

Results: Side parts — cut two (cut list), Top and bottom — cut two (cut list), Overlay back — cut one (cut list), Overall depth including back (in), Stile length — cut two (in), Rail length between stiles — cut two (in), Clear width of each bay (in), Clear opening height (in).